Archives

Archives for ‘PRODUCTS’

TSC 4059B

MICROCHIP TIMING & SYNCHRONIZATION

TSC 4059B

4059B Low Frequency Distribution Amplifier for IRIG A/B or G Time
One-input, fifteen-output low frequency amplifier ideal for distributing IRIG A/B or G time code
IRIG A/B, G time code amplifier

The 4059B provides fifteen isolated outputs from a single input for distributing IRIG A/B or G timecode signals
The 4059B is a one-input, fifteen-output Low Frequency amplifier housed in a compact i1U, 19 inch rack mount chassis. It provides fifteen isolated (> 70 dB) outputs from a single input.

Remote Monitoring
An Ethernet port on the rear panel provides the capability to remotely monitor the status of the input and all output signals.

Signal Failure Alarm
Any failure in the unit will immediately provide an alarm to the Ethernet port.

LED Signal Status
The front panel provides green LED status for the input and green/red for all output signals, as well as indicating an input of 1 kHz, 10 kHz, or other. A green LED on the front panel also provides power status.

Key Features

  • Low Phase Noise
  • High Channel Isolation
  • 15 Isolated Outputs (>70 dB)
  • Yields 225 Outputs at 2nd Level
  • LED Status Indicators for All Inputs Outputs
  • Status Information via Ethernet
  • Settable Gain

Datasheet

TSC 4037A

MICROCHIP TIMING & SYNCHRONIZATION

TSC 4037A

4037A L1/L2 Distribution Amplifier
One-input, sixteen-output L1/L2 distribution amplifier ideal for distributing GPS antenna signals
L1/L2 Distribution Amplifier

The 4037A provides sixteen outputs from a single input for distributing signals communication systems, satellite earth stations, test facilities and engineering laboratories.
The 4037A is a 1-input, 16-output L1/L2-Band amplifier housed in a compact 1U, 19-inch rack mount chassis.

Key Features

  • Output Distribution: The 4037A provides sixteen isolated (>15 dB) outputs from a single input for exceptional L1/L2-Band distribution.
  • LED Power Indicators: The front panel provides green LED status for the power and antenna bias voltage setting.

Datasheet

TSC 4036B

MICROCHIP TIMING & SYNCHRONIZATION

TSC 4036B

4036B RF Distribution Amplifier
One-input, fifteen-output RF distribution amplifier delivers a centralized output signal without degration
RF Distribution Amplifier

The 4036B provides fifteen outputs from a single input for distributing RF signals in laboratory, factory, and test and measurement environments where low phase noise and high channel isolation are required. The 4036B is a 1-input, 15-output RF distribution amplifier in a 1U chassis that provides fifteen isolated copies of a single input.

Frequency Range
The 4036B operates over a frequency range of 1MHz to 20 MHz.

Signal Level Fault Sensing
Fault Sensing of signal level is provided on the input and every output. Faults are indicated on front panel LEDs as well as via an Ethernet interface.

Key Features

  • Low Phase Noise
  • High Channel Isolation
  • 15 Outputs
  • Yields 225 Outputs at 2nd Level
  • LED Status Indicators for All Inputs Outputs
  • Status Information via Ethernet
  • Settable Gain

Datasheet

TSC 4033A

MICROCHIP TIMING & SYNCHRONIZATION

TSC 4033A

4033A Pulse Distribution Amplifier
One-input, fifteen-output pulse distribution amplifier
Pulse Distribution AmplifierThe 4033A provides fifteen outputs from a single input for distributing standard clock and other pulse rate signals in laboratory, factory, and test and measurement environments.

Ethernet Connectivity for Remote Monitoring
An Ethernet port on the rear panel provides the capability to remotely monitor the status of the input and all output signals.

Fault Status
Any failure in the unit will immediately provide an alarm to the Ethernet port. The front panel provides green LED status for the input and green/red for all output signals, as well as indicating an input of 1 PPS, DC IRIG, or Other.

Key Features

  • Detects 1 PPS, IRIG-B, or Other
  • Compact Rack Mount 1U-High Package
  •  ±500ps Differential Delay Between Outputs
  • LED Status Indicators for All Inputs and Outputs
  • Status Information via Ethernet

Datasheet

Bittium TAC WIN Radio Head IV™

    • Bittium Tough Mobile 2
    • Bittium Tough Mobile 2 C
    • Bittium Secure Suite™
    • Bittium SafeMove® Mobile VPN
    • Bittium SafeMove® Analytics
    • Bittium SafeMove® OEM Toolkit
    • Bittium SafeMove® Zone Worker Protection
    • Bittium SafeMove® Managed & Hosted Services

Bittium TAC WIN Radio Head IV™

Bittium TAC WIN Radio Head IV™
For creating a Radio Link network, which brings high capacity connections to the command site, or backbone to fixed core network. Frequency band 4400-5000 MHz. Available in two variants, with integrated beam steering antenna or with integrated fixed beam antenna and external rotator integration, depending on the requirements.

With the Software Defined Radio (SDR) based Bittium Tactical Wireless IP Network (TAC WIN) battlegroups can create high-data-rate wireless IP networks as a backbone to support command and control (C2) data transmission during military operations. Compared to existing tactical data link networks, flexibility to use the Bittium solution in different frequency bands and network structures provides cost effectiveness, ease of use, and efficiency.

Bittium TAC WIN network can be deployed in any location. It enables formation of an independent IP network and is compatible with existing infrastructure, both wire-line and wireless.

As it is software-defined, the system is versatile, can be easily upgraded and it is easy to adapt. The system enables a mesh network solution with high-data-rates and automatic network configuration required by battlegroups on the move.

Bittium TAC WIN has excellent performance and form factor as both network node and router functionalities are integrated into a single product. 

 
 

Flexibility

  • Single system for MANET, Point-to-Multipoint and Link use.
  • Wireless and wired connections seamlessly integrated to one network using OLSR routing.
  • Supporting multiple frequency bands: NATO I, III and IV.

ECCM Capabilities

  • Frequency hopping, adaptive modulation and MANET routing ensuring connectivity also during electronic warfare conditions.
  • Independent from GNSS using Bittium AIS synchronization.

High Data Throughput

  • Up to 50 Mbps data throughput with TAC WIN Waveform.
  • All-IP wideband connectivity across the battlefield.

Quality of Service

  • Operation of high priority services guaranteed even during conditions with limited connectivity.

Security

  • Bittium TAC WIN Waveform has TRANSEC that encrypts all data using AES-256.

Long Range

  • Up to 45 km range per hop in Link/Point-to-Point use.

Easy Integration

  • Standard IP interfaces and protocols supported.
  • Built in support for integration of legacy CNR-radios using audio and serial data.
  • Time and location information available for 3rd party systems.

Built-in Tactical VoIP Service

  • With built-in Bittium Tough VoIP Service, TAC WIN offers seamless and reliable voice in tactical network.
  • Supporting tactical voice features, user and device mobility, integration to 3rd party SIP systems.

Easy Management

  • Simple setup procedure.
  • Self-organizing network. No need for user interaction during operation.
  • Intuitive and visual Bittium Tactical Network Management™ system for the networks and nodes.

RH-IV and RH-IV High Gain

  • Frequency band 4400-5000 MHz
  • Signal bandwidth 5/10/20 MHz
  • Data throughput with Bittium TAC WIN Waveform: 50Mbps
  • Channel raster 250 kHz
  • TAC WIN Waveform Tx power: 1250 mW
  • Operating voltage: 16-60Vdc
  • Temperature range
    • -40 - 55 °C (operating)
    • -40 - 70 °C (storage)
  • Ingress protection class IP67
  • Dimensions 385 x 520 x 67 mm (h x w x d)
  • Weight 10 kg
  • Tested with MIL-STD-810G and MIL-STD-461G
  • Passive cooling (no fans)
  • One hybrid cable interface (power and data)

RH-IV variant: Integrated patch antenna with 50° beam steering (gain 19dBi / beamwidth 9° / vertical polarization). Can be used with external antenna.

RH-IV High Gain variant: Integrated fixed beam antenna with 9° beam (gain 23dBI / vertical polarization) and external rotator control interface.

Bittium Tactical Network Management™

    • Bittium Tough Mobile 2
    • Bittium Tough Mobile 2 C
    • Bittium Secure Suite™
    • Bittium SafeMove® Mobile VPN
    • Bittium SafeMove® Analytics
    • Bittium SafeMove® OEM Toolkit
    • Bittium SafeMove® Zone Worker Protection
    • Bittium SafeMove® Managed & Hosted Services

Bittium Tactical Network Management™

Bittium TAC WIN Waveform™
Intuitive and visual toolset for network planning, real-time management of the networks, and performance analysis based on big data collected from the network.

With the Software Defined Radio (SDR) based Bittium Tactical Wireless IP Network (TAC WIN) battlegroups can create high-data-rate wireless IP networks as a backbone to support command and control (C2) data transmission during military operations. Compared to existing tactical data link networks, flexibility to use the Bittium solution in different frequency bands and network structures provides cost effectiveness, ease of use, and efficiency.

Bittium TAC WIN network can be deployed in any location. It enables formation of an independent IP network and is compatible with existing infrastructure, both wire-line and wireless.

As it is software-defined, the system is versatile, can be easily upgraded and it is easy to adapt. The system enables a mesh network solution with high-data-rates and automatic network configuration required by battlegroups on the move.

Bittium TAC WIN has excellent performance and form factor as both network node and router functionalities are integrated into a single product. 

 
 

Flexibility

  • Single system for MANET, Point-to-Multipoint and Link use.
  • Wireless and wired connections seamlessly integrated to one network using OLSR routing.
  • Supporting multiple frequency bands: NATO I, III and IV.

ECCM Capabilities

  • Frequency hopping, adaptive modulation and MANET routing ensuring connectivity also during electronic warfare conditions.
  • Independent from GNSS using Bittium AIS synchronization.

High Data Throughput

  • Up to 50 Mbps data throughput with TAC WIN Waveform.
  • All-IP wideband connectivity across the battlefield.

Quality of Service

  • Operation of high priority services guaranteed even during conditions with limited connectivity.

Security

  • Bittium TAC WIN Waveform has TRANSEC that encrypts all data using AES-256.

Long Range

  • Up to 45 km range per hop in Link/Point-to-Point use.

Easy Integration

  • Standard IP interfaces and protocols supported.
  • Built in support for integration of legacy CNR-radios using audio and serial data.
  • Time and location information available for 3rd party systems.

Built-in Tactical VoIP Service

  • With built-in Bittium Tough VoIP Service, TAC WIN offers seamless and reliable voice in tactical network.
  • Supporting tactical voice features, user and device mobility, integration to 3rd party SIP systems.

Easy Management

  • Simple setup procedure.
  • Self-organizing network. No need for user interaction during operation.
  • Intuitive and visual Bittium Tactical Network Management™ system for the networks and nodes.

Bittium Tactical Network Management system provides intuitive and visual tools for tactical network planning, real-time management of the networks and performance analysis based on big data collected from the network. This enables quick and effective deployment of the networks and successful operations.

Tools included

  • Tactical Network Planner Tool
  • Tactical Network Manager Tool
  • Network Analytics Tool

Supported networks and nodes

Supported services

Supported waveforms

  • Bittium TAC WIN Waveform™
  • Bittium Narrowband Waveform™
  • ESSOR High Data Rate Waveform

Bittium TAC WIN Waveform™

    • Bittium Tough Mobile 2
    • Bittium Tough Mobile 2 C
    • Bittium Secure Suite™
    • Bittium SafeMove® Mobile VPN
    • Bittium SafeMove® Analytics
    • Bittium SafeMove® OEM Toolkit
    • Bittium SafeMove® Zone Worker Protection
    • Bittium SafeMove® Managed & Hosted Services

Bittium TAC WIN Waveform™

Bittium TAC WIN Waveform™
The foundation for a high performance network. Supports up to 1000 nodes in one network and several services, such as Multicasting and QoS.

With the Software Defined Radio (SDR) based Bittium Tactical Wireless IP Network (TAC WIN) battlegroups can create high-data-rate wireless IP networks as a backbone to support command and control (C2) data transmission during military operations. Compared to existing tactical data link networks, flexibility to use the Bittium solution in different frequency bands and network structures provides cost effectiveness, ease of use, and efficiency.

Bittium TAC WIN network can be deployed in any location. It enables formation of an independent IP network and is compatible with existing infrastructure, both wire-line and wireless.

As it is software-defined, the system is versatile, can be easily upgraded and it is easy to adapt. The system enables a mesh network solution with high-data-rates and automatic network configuration required by battlegroups on the move.

Bittium TAC WIN has excellent performance and form factor as both network node and router functionalities are integrated into a single product. 

 
 

Flexibility

  • Single system for MANET, Point-to-Multipoint and Link use.
  • Wireless and wired connections seamlessly integrated to one network using OLSR routing.
  • Supporting multiple frequency bands: NATO I, III and IV.

ECCM Capabilities

  • Frequency hopping, adaptive modulation and MANET routing ensuring connectivity also during electronic warfare conditions.
  • Independent from GNSS using Bittium AIS synchronization.

High Data Throughput

  • Up to 50 Mbps data throughput with TAC WIN Waveform.
  • All-IP wideband connectivity across the battlefield.

Quality of Service

  • Operation of high priority services guaranteed even during conditions with limited connectivity.

Security

  • Bittium TAC WIN Waveform has TRANSEC that encrypts all data using AES-256.

Long Range

  • Up to 45 km range per hop in Link/Point-to-Point use.

Easy Integration

  • Standard IP interfaces and protocols supported.
  • Built in support for integration of legacy CNR-radios using audio and serial data.
  • Time and location information available for 3rd party systems.

Built-in Tactical VoIP Service

  • With built-in Bittium Tough VoIP Service, TAC WIN offers seamless and reliable voice in tactical network.
  • Supporting tactical voice features, user and device mobility, integration to 3rd party SIP systems.

Easy Management

  • Simple setup procedure.
  • Self-organizing network. No need for user interaction during operation.
  • Intuitive and visual Bittium Tactical Network Management™ system for the networks and nodes.

Key features

  • Slow/fast frequency hopping
  • Operation without GNSS
  • Network time distribution via Air Interface
  • Optimized interference cancellation algorithms
  • Supported bandwidths: 5 / 10 / 20 MHz
  • QoS based network radio resource management
  • Supports > 1000 nodes in one network

Bittium TAC WIN Radio Head III™

    • Bittium Tough Mobile 2
    • Bittium Tough Mobile 2 C
    • Bittium Secure Suite™
    • Bittium SafeMove® Mobile VPN
    • Bittium SafeMove® Analytics
    • Bittium SafeMove® OEM Toolkit
    • Bittium SafeMove® Zone Worker Protection
    • Bittium SafeMove® Managed & Hosted Services

Bittium TAC WIN Radio Head III™

Bittium TAC WIN Radio Head III™

For creating a Point-to-Multipoint network, which provides ideal solution for access networks to provide services from link network to Bittium TAC WIN MANET. Frequency band 1350-2400 MHz.

With the Software Defined Radio (SDR) based Bittium Tactical Wireless IP Network (TAC WIN) battlegroups can create high-data-rate wireless IP networks as a backbone to support command and control (C2) data transmission during military operations. Compared to existing tactical data link networks, flexibility to use the Bittium solution in different frequency bands and network structures provides cost effectiveness, ease of use, and efficiency.

Bittium TAC WIN network can be deployed in any location. It enables formation of an independent IP network and is compatible with existing infrastructure, both wire-line and wireless.

As it is software-defined, the system is versatile, can be easily upgraded and it is easy to adapt. The system enables a mesh network solution with high-data-rates and automatic network configuration required by battlegroups on the move.

Bittium TAC WIN has excellent performance and form factor as both network node and router functionalities are integrated into a single product. 

 
 

Flexibility

  • Single system for MANET, Point-to-Multipoint and Link use.
  • Wireless and wired connections seamlessly integrated to one network using OLSR routing.
  • Supporting multiple frequency bands: NATO I, III and IV.

ECCM Capabilities

  • Frequency hopping, adaptive modulation and MANET routing ensuring connectivity also during electronic warfare conditions.
  • Independent from GNSS using Bittium AIS synchronization.

High Data Throughput

  • Up to 50 Mbps data throughput with TAC WIN Waveform.
  • All-IP wideband connectivity across the battlefield.

Quality of Service

  • Operation of high priority services guaranteed even during conditions with limited connectivity.

Security

  • Bittium TAC WIN Waveform has TRANSEC that encrypts all data using AES-256.

Long Range

  • Up to 45 km range per hop in Link/Point-to-Point use.

Easy Integration

  • Standard IP interfaces and protocols supported.
  • Built in support for integration of legacy CNR-radios using audio and serial data.
  • Time and location information available for 3rd party systems.

Built-in Tactical VoIP Service

  • With built-in Bittium Tough VoIP Service, TAC WIN offers seamless and reliable voice in tactical network.
  • Supporting tactical voice features, user and device mobility, integration to 3rd party SIP systems.

Easy Management

  • Simple setup procedure.
  • Self-organizing network. No need for user interaction during operation.
  • Intuitive and visual Bittium Tactical Network Management™ system for the networks and nodes.
  • Frequency band 1350-2400 MHz
  • Signal bandwidth 5/10 MHz
  • Data throughput with Bittium TAC WIN Waveform: 26Mbps
  • Channel raster 250 kHz
  • TAC WIN Waveform Tx power: 4 W
  • Operating voltage: 10-60Vdc
  • Temperature range
    • -40 - 55 °C (operating)
    • -40 - 70 °C (storage)
  • Ingress protection class IP67
  • Dimensions 160 x 256 x 454 mm (h x w x d)
  • Weight 18 kg
  • Tested with MIL-STD-810G and MIL-STD-461G
  • Passive cooling (no fans)

Bittium TAC WIN Radio Head I™

    • Bittium Tough Mobile 2
    • Bittium Tough Mobile 2 C
    • Bittium Secure Suite™
    • Bittium SafeMove® Mobile VPN
    • Bittium SafeMove® Analytics
    • Bittium SafeMove® OEM Toolkit
    • Bittium SafeMove® Zone Worker Protection
    • Bittium SafeMove® Managed & Hosted Services

Bittium TAC WIN Radio Head I™

Bittium TAC WIN Radio Head I™ For creating a Mobile Ad hoc Network (MANET), which is the optimal solution for troops in a relatively small area who require a mobile and flexible network. Frequency band 225-400 MHz.

With the Software Defined Radio (SDR) based Bittium Tactical Wireless IP Network (TAC WIN) battlegroups can create high-data-rate wireless IP networks as a backbone to support command and control (C2) data transmission during military operations. Compared to existing tactical data link networks, flexibility to use the Bittium solution in different frequency bands and network structures provides cost effectiveness, ease of use, and efficiency.

Bittium TAC WIN network can be deployed in any location. It enables formation of an independent IP network and is compatible with existing infrastructure, both wire-line and wireless.

As it is software-defined, the system is versatile, can be easily upgraded and it is easy to adapt. The system enables a mesh network solution with high-data-rates and automatic network configuration required by battlegroups on the move.

Bittium TAC WIN has excellent performance and form factor as both network node and router functionalities are integrated into a single product. 

 
 

Flexibility

  • Single system for MANET, Point-to-Multipoint and Link use.
  • Wireless and wired connections seamlessly integrated to one network using OLSR routing.
  • Supporting multiple frequency bands: NATO I, III and IV.

ECCM Capabilities

  • Frequency hopping, adaptive modulation and MANET routing ensuring connectivity also during electronic warfare conditions.
  • Independent from GNSS using Bittium AIS synchronization.

High Data Throughput

  • Up to 50 Mbps data throughput with TAC WIN Waveform.
  • All-IP wideband connectivity across the battlefield.

Quality of Service

  • Operation of high priority services guaranteed even during conditions with limited connectivity.

Security

  • Bittium TAC WIN Waveform has TRANSEC that encrypts all data using AES-256.

Long Range

  • Up to 45 km range per hop in Link/Point-to-Point use.

Easy Integration

  • Standard IP interfaces and protocols supported.
  • Built in support for integration of legacy CNR-radios using audio and serial data.
  • Time and location information available for 3rd party systems.

Built-in Tactical VoIP Service

  • With built-in Bittium Tough VoIP Service, TAC WIN offers seamless and reliable voice in tactical network.
  • Supporting tactical voice features, user and device mobility, integration to 3rd party SIP systems.

Easy Management

  • Simple setup procedure.
  • Self-organizing network. No need for user interaction during operation.
  • Intuitive and visual Bittium Tactical Network Management™ system for the networks and nodes.
  • Frequency band 225-400 MHz
  • Signal bandwidth 5 MHz
  • Data throughput with Bittium TAC WIN Waveform: 12Mbps
  • Supports 2x2 MIMO
  • Channel raster 250 kHz
  • TAC WIN Waveform Tx power: 2 x 4 W
  • Operating voltage: 10-60Vdc
  • Temperature range
    • -40 - 55 °C (operating)
    • -40 - 70 °C (storage)
  • Ingress protection class IP67
  • Dimensions 160 x 256 x 454 mm (h x w x d)
  • Weight 18 kg
  • Tested with MIL-STD-810G and MIL-STD-461G
  • Passive cooling (no fans)

Bittium TAC WIN Tactical Router™

Bittium

    • Bittium Tough Mobile 2
    • Bittium Tough Mobile 2 C
    • Bittium Secure Suite™
    • Bittium SafeMove® Mobile VPN
    • Bittium SafeMove® Analytics
    • Bittium SafeMove® OEM Toolkit
    • Bittium SafeMove® Zone Worker Protection
    • Bittium SafeMove® Managed & Hosted Services

Bittium TAC WIN Tactical Router™

Bittium TAC WIN Tactical Router™

The system's routing and radio baseband processing unit running the Bittium TAC WIN Waveform and offering a reliable high performance network in versatile and demanding environments.

With the Software Defined Radio (SDR) based Bittium Tactical Wireless IP Network (TAC WIN) battlegroups can create high-data-rate wireless IP networks as a backbone to support command and control (C2) data transmission during military operations. Compared to existing tactical data link networks, flexibility to use the Bittium solution in different frequency bands and network structures provides cost effectiveness, ease of use, and efficiency.

Bittium TAC WIN network can be deployed in any location. It enables formation of an independent IP network and is compatible with existing infrastructure, both wire-line and wireless.

As it is software-defined, the system is versatile, can be easily upgraded and it is easy to adapt. The system enables a mesh network solution with high-data-rates and automatic network configuration required by battlegroups on the move.

Bittium TAC WIN has excellent performance and form factor as both network node and router functionalities are integrated into a single product. 

 
 

Flexibility

  • Single system for MANET, Point-to-Multipoint and Link use.
  • Wireless and wired connections seamlessly integrated to one network using OLSR routing.
  • Supporting multiple frequency bands: NATO I, III and IV.

ECCM Capabilities

  • Frequency hopping, adaptive modulation and MANET routing ensuring connectivity also during electronic warfare conditions.
  • Independent from GNSS using Bittium AIS synchronization.

High Data Throughput

  • Up to 50 Mbps data throughput with TAC WIN Waveform.
  • All-IP wideband connectivity across the battlefield.

Quality of Service

  • Operation of high priority services guaranteed even during conditions with limited connectivity.

Security

  • Bittium TAC WIN Waveform has TRANSEC that encrypts all data using AES-256.

Long Range

  • Up to 45 km range per hop in Link/Point-to-Point use.

Easy Integration

  • Standard IP interfaces and protocols supported.
  • Built in support for integration of legacy CNR-radios using audio and serial data.
  • Time and location information available for 3rd party systems.

Built-in Tactical VoIP Service

  • With built-in Bittium Tough VoIP Service, TAC WIN offers seamless and reliable voice in tactical network.
  • Supporting tactical voice features, user and device mobility, integration to 3rd party SIP systems.

Easy Management

  • Simple setup procedure.
  • Self-organizing network. No need for user interaction during operation.
  • Intuitive and visual Bittium Tactical Network Management™ system for the networks and nodes.

Tactical Router

  • Routing and waveform processing unit
  • Operating voltage: 10 - 60Vdc
  • Temperature range
    • -40 - 55 °C (operating)
    • -40 - 70 °C (storage)
  • Ingress protection class: IP67
  • Dimensions 223 x 356 x 400 mm (h x w x d)
  • Weight 19,4 kg
  • Tested with MIL-STD-810G and MIL-STD-461G
  • Passive cooling (no fans)

 Interfaces

  • 3 x TAC WIN Radio units
  • 4 x WAN (2 x RJ45 1000BASE-T / 2 x Fiber 1000BASE-LX)
  • 4 x LAN (1000BASE-T) with PoE (802.3af)
  • 8 x ITU-T G991.2 (GSHDSL)
  • 4 x serial/audio connector
  • 2 x USB
  • GPS in/out
  • ERASE -button and ON/OFF -switch

Routing services

  • Custom OLSR in TACTICAL network
  • Custom multicast in TACTICAL network
  • OSPF / BGP routing for external connections
  • Automatic IP address configuration
  • VLANs and configurable bridges
  • QoS: Traffic classifying and priority queues (8 queues)
  • SNMP v3
  • Radius server support
  • AAA
  • 802.1X port authentication
  • Call admission control

Tactical VoIP service

Other services

  • Network configuration with single configuration file
  • SNMP interface
  • IPsec tunneling
  • Netflow
  • Firewall
  • 3 different user levels
  • Easy to use local web GUI
© 2014-2022 Solutions Maker Co.,Ltd.